Try searching by key words, order- or product code or serial number e.g. “CM442” or “Technical information”
Enter at least 2 characters to start the search.
Flowfit CYA27 - modular multiparameter assembly for drinking and process water

Flow assembly for multi-parameter measurements Flowfit CYA27

Modular assembly for drinking and process water applications

CYA27
Loading price
Prices temporarily unavailable
Price on request
from CHF ??.-
Flowfit CYA27 - Modular assembly for disinfection, pH/ORP measurement and flow indication ©Endress+Hauser
Flowfit CYA27 - Modules for disinfection sensors, flow measurement incl. flow switch, sampling valve ©Endress+Hauser
Flowfit CYA27 - Fully expanded for disinfection, pH/ORP, conductivity measurement, flow monitoring ©Endress+Hauser
Flowfit CYA27 - Single module for disinfection sensors incl. sampling valve ©Endress+Hauser

Specs at a glance

  • Process temperature

    0 to 60 °C (32 to 140°F)

  • Process pressure

    0 to 4 bar (0 to 58 psi) relative

Field of application

Flowfit CYA27 allows for monitoring of up to 6 relevant parameters at the same time. Sensors installed in the assembly need a sample flow as low as 5 l/h (1.32 gph) for accurate measurement. This enables precise control of processes such as disinfection with minimum water loss. The assembly offers flexible mounting options, an integrated sampling valve and a cleaning and dosing module. A flow monitoring can ensure that your measurement is always operational.

Flowfit CYA27 is a flow assembly for the measurement of multiple parameters such as chlorine, chlorine dioxide, bromine, ozone, pH/ORP, conductivity or oxygen mainly in bypass installations. It is suitable for the following applications:

  • Drinking water

  • Process water

  • Seawater

  • Pool water

Benefits

  • Maximum flexibility: The modular design of the assembly enables perfect adaption to process requirements. You can measure up to 6 variables. Flexible mounting options allow you to position the sensor where it is needed for accurate measurement.

  • Minimum water loss: When installed in Flowfit CYA27, sensors require a sample flow as low as 5 l/h (1.32 gph) for precise measurement. Only a very small volume of water goes to waste.

  • Reliable measurement: The integrated flow monitoring makes sure that your measurement is always operational. The optional status indication light shows if the flow is correct, allowing for direct reaction to errors.

  • Easy maintenance: The optional cleaning and dosing module enables automated cleaning cycles and acidification of the medium for specific disinfection process conditions.

Predecessor

Success stories

  • Disinfection monitoring to eliminate germs in potable water Disinfection monitoring to eliminate germs in potable water

    Safeguarding health with clean water

    To ensure that limit values for drinking water are complied with at all times, NSI-Technik supports the pathology department of Würzburg University Hospital with a disinfection panel

  • Container with measuring instrument inside Container with measuring instrument inside

    Safe phosphate elimination with minimal effort

    Thanks to Endress+Hauser the Wastewater treatment plant in Breuberg meets legal requirements and ensures safe phosphate elimination.

  • Breaking wave Breaking wave

    Toilet flushing with a fresh sea breeze

    Using seawater to flush toilets can save a lot of drinking water. To ensure a constant water supply, the sensors used must function reliably to meet the water quality objectives (WQO).

  • Detection of SARS Cov-2 virus in wastewater to make reliable predictions Detection of SARS Cov-2 virus in wastewater to make reliable predictions

    Monitoring biological parameters in wastewater

    Examination of wastewater, using the Liquistation CSF48 and the Liquiport CSP48 mobile, can provide valuable information about the occurrence of Covid 19 infections in a specific area

  • Wastewater treatment and TOC measurement Wastewater treatment and TOC measurement

    TOCeq measurement in wastewater treatment

    TOC measurements are often performed using analyzers that require expensive reagents. The CAS51D enables the plant operators to comply with WHO requirements and guarantees tight measurement intervals.

  • Simple products

  • Easy to select, install and operate

Technical excellence

Simplicity

  • Standard products

  • Reliable, robust and low-maintenance

Technical excellence

Simplicity

  • High-end products

  • Highly functional and convenient

Technical excellence

Simplicity

  • Specialized products

  • Designed for demanding applications

Technical excellence

Simplicity

Variable

FLEX selections Technical excellence Simplicity
  • F
  • L
  • E
  • X

Fundamental selection

Meet your basic measurement needs

Technical excellence
Simplicity
  • F
  • L
  • E
  • X

Lean selection

Handle your core processes easily

Technical excellence
Simplicity
  • F
  • L
  • E
  • X

Extended selection

Optimize your processes with innovative technologies

Technical excellence
Simplicity
  • F
  • L
  • E
  • X

Xpert selection

Master your most challenging applications

Technical excellence
Simplicity

Variable
Compare products
We use cookies to store information on your device which helps us to customize and improve your interactions with us. More on cookies can be found in the privacy policy.