Promag 10P

Electromagnetic

The flowmeter for highest medium temperatures with a highly cost-effective transmitter.
Dedicated to chemical and process applications with corrosive liquids and high medium temperatures.

Diverse applications – wide variety of wetted materials. Energy‐saving flow measurement – no pressure loss due to cross section constriction. Maintenance‐free – no moving parts.
Nominal diameter: max. DN 600 (24"). All common process connections. Liner made of PTFE.

Cost-effective – designed for easy applications and direct integration. Safe operation – display provides easily readable process information. Fully industry-compliant – IEC/EN/NAMUR.
2-line display with push buttons. Device as compact or remote version. HART.

DN 15 to 600
1/2" to 24"

Liner: PTFE
Electrodes: 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022)

Volume flow

Volume flow: ±0,5% o.r. ± 2 mm/s (±0,5% o.r. ± 0,08 in/s)

4 dm3/min to 9600 m3/h (0.5 gal/min to 44000 gal/min)

PN40
Cl. 300
JIS 20K
AS 2129 Table E

–40 to +130°C (–40 to +266°F)

–40 to +60 °C (–40 to +140 °F)

DN 15 to 300 (½ to 12"): AlSi10Mg, coated
DN 350 to 600 (14 to 24"): Carbon steel with protective varnish

Powder-coated die-cast aluminum

Standard: IP 67 (Type 4X enclosure) for transmitter and sensor
Optional: IP 68 (Type 6P enclosure) for remote version of sensor

2‐line display with push buttons
Configuration via local display and operating tools possible

4‐20 mA HART (active)
Pulse/switch output (passive)

None

HART

DC 11 to 40 V
AC 85 to 250 V (45 to 65 Hz)
AC 20 to 28 V (45 to 65 Hz)

FM
CSA

CE, C-tick, EAC marking

Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)

PED